Civil Instruments

Product Details:

Model No.: VT-1002

Standards: IS 4031, 5516, 1727 & 4828, ASTM C-204, BS 4359-2

Specification: Designed to find out specific gravities of semi liquids like mud and other liquids having densities in the range 0.8 to 2.5. It has a stainless steel bam calibrated specific gravities from 0.8 to 2.5. A stainless steel cup with lid and overflow vent is fitted on one side of the beam. A counter weights with cursor slides over the graduated scale. The beam has a knife-edge at centre which rests in a fulcrum fitted in the stand. Leveling screws and spirit level are fitted to the stand.
Spares & Accessories (On Extra Cost) :
Punch to cut filter paper discs. Non-perforated disc. Suction bulb, Mercury.

 

Request
Callback

Product Details:

Model No.: VT-1305

Standards: ASTM D2172, AASHTO T-58, T-164

Centrifuge Extractor (Hand Operated) Description: V-Tech an eminence manufacturer & supplier of testing instrument Centrifuge Extractor (Hand Operated), model no. VT-1305 conforms to the ASTM D2172, AASHTO T-58, T-164 industry standards. Centrifuge Extractor (Hand Operated) is basically used in checking and determining the quantitative Bitumen percentage in the bituminous mixtures. In Bituminous mix, a solvent is added and by centrifugal action bitumen is removed. In detail, the bowl is mounted on the vertical shaft that protrudes from the cast housing. The bowl, mounted on a shaft, is rotated manually very fast by the enclosed gears in the cast body with the attached handle. Then, the solvent is added slowly through the housing cap holes. An external drain is provided which collect the dissolved Bitumen that is coming out of the moving/rotating bowl and collected in the housing.

V-Tech Centrifuge Extractor (Hand Operated) is successfully utilized in diverse parts of the different industries varying from automobile, food, pharmaceuticals, manufacturing, oils & gas etc.

Specification:

• Comes with Cylindrical Aluminum rotor bowl with a capacity to carry 1500 gms sample mix, which is easily removable.
• A cap for the bowl, which prevents leakage too.
• A nut to for tightening the cap and bowl

 

 

Request
Callback

Product Details:

Product Description: V-Tech India manufactures compaction factor apparatus that has been designed as per the international standards and requirements of construction industry. The apparatus allows determining the workability of different types of concrete mixes by assessing the compaction ratio. Having a simple set up, the compaction factor apparatus performs stably and is guaranteed for high durability. It can be used ‘on site’ and the workability of the concrete mix could be easily determined in less of time.

Compaction Factor Apparatus Product specifications :
Compaction factor apparatus from V-Tech India has the following specifications

• The apparatus is made as a rigid metallic frame that has two conical hoppers and one cylinder at its base
• The conical hoppers have hinged trapdoors with quick release catchers at the lower end
• The cylinder top is covered with a circular metal plate
• A plaster trowel and a metal rod rounded at both ends (600 mm in length and 16 mm in diameter) is also provided

Our compaction factor apparatus has been developed with the best quality materials like stainless steel and delivered appropriate finishing and dimensional accuracy to ensure precise results for the engineers and technicians. The compaction factor apparatus conforms to the standards IS 1199 and 5515 and BS 1881 – 103.

 

Request
Callback

Product Details:

V-Tech is a renowned organization that manufactures and supplies the concrete flow table test set, which is used for high capacity concrete mix and to maintain a flow index by the means of arithmetic. It supplies this product in the reputed construction projects under governmental and non-governmental organizations.

Quality standard of the products : In V-Tech we are professional enough to maintain standard qualities of the products. The concrete flow table test set is manufactured by the means of International standard EN 12350-5.

Product Description : The dimension of the apparatus is 700 X 850 X 300 mm and the weight is 40 kg. Between the two tables, the measurement of the upper table is 700 X 700 mm. The top diameter of the stainless steel cone is 130 +/- 2; the height and base diameter are both 200 +/- 2 and its thickness is 1.5 mm. Set 1106 is for a concrete flow test, Set 1106 A is for cone flow and Set 1106 B is made of wooden tamper 40 X 40 X 335.

Specification:

• The apparatus is made of a double steel table
• The flow index is shown in the arithmetic count.
• The upper table is hinged on the lower one.
• The top table is corrosion protected.

 

Request
Callback

Product Details:

 

 

Product Description:V-TECH India manufactures high quality metallic cube moulds for testing and analysis of the specimens for the parameters of strength, compaction and others. We make very precise moulds as per the demands of construction engineers and laboratories catering the civil engineering verticals. The moulds are made as per the Indian and British standards and conform to all the desirable dimensional characteristics sought for accurate testing. The metallic cube moulds of SE-Test India are developed with the best grade steel and cast iron material to ensure highest quality and finishing of them. Durability is also maximized due to non corrosive and rust resistant nature of the cube moulds.

Product Specifications – 
Find out the objective specifications of our cube moulds here below –

• Metric sized cube moulds are available with machined flat surfaces and +/- 0.2 mm accuracy attributes while finishing is within 0.2 mm
• Inch sized cube moulds are offered as machined flat with +/- 0.01 inch accuracy and with 0.01 inch finish
• The metal moulds are delivered complete with their base plate of metal together with the fasteners, clamps and springs

Our metal cube moulds are made as per the industry requirements and are used for high level testing of specimens towards ensuring core stability and strength of structures and buildings.

Standards:

 

 

 

Request
Callback

Product Details:

Product Description: V-Tech manufactures cylindrical moulds of metal for specimen testing and analyses of concrete columns. We make cylindrical moulds in standard sizes that are widely used by the civil engineering labs in India and world for testing the compression, linearity, stability and other essential attributes of concrete columns. The moulds are delivered high quality finish at its inner surface to ensure that best specimens are derived without any imperfection. Our cylindrical mould is developed with high grade steel and cast iron material that offer strength and durability, especially the rust and corrosion resistance. The dimensional make of the moulds is such that deformation is negligible even after continued and regular use of them.

Product Specifications – 
Find the objective specifications of metal cylindrical moulds of V-Tech India here below –

• The mould is made as split type with two equal segments that can be combined accurately
• Base plate and top plate are offered together with cylinder. Fasteners are also provided
• Base plate and top plate are machined flat to +/- 0.03 mm
• Mean diameter (internal) of the moulds is within the accuracy range of +/- 0.2 mm
• Height of the metal cylindrical mould is within accuracy range of +/- 1 mm

Cylindrical moulds of V-Tech India are made with highest precision & these serve well the demands of engineers and technicians. Our moulds can be used easily on site to make the specimens.

 

Request
Callback

Product Details:

Model No.: VT-1133

Standards: IS 516, BS 1881

A Digital Indicator fitted with the side of machine Electric operated Single Phase

Specification: In these load frames “C” channels are used, they are welded at the top as well as bottom and with stand high loads. A hydraulic jack is fitted at centre of the base of the load frame, over which can be fitted lower platen and spacer block with the help of centering pin. A lead screw passes through the top of the frame. To the lower end of this lead screw is fixed the upper platen with spherical seat for self alignment. The platens are accurately machined, hardened and polished. The lower platen grooves to correctly place the specimen.

Note: The platens are normally rectangular on shape, but on special request square platens or circular platens can be supplied at an extra cost.

Request
Callback

Product Details:

Model No.: VT-1140

Specification: The Flexure Strength Testing Machines are designed to provide maximum rigidity throughout their working range. The load is applied by the upward movement of a hydraulic ram. The jack can be raised or lowered for testing different size beams. The load is indicated on a calibrated Bourdon tube type Pressure Gauge of range: 0-100kN x 0.5kN (0-10,000 kgf x 50 Kgf). The load gauge is calibrated against NPL/ NCCBM certified proving ring.

Request
Callback

Product Details:

Model No.: VT-1006

Standards: IS: 6932 (PART VIII), ASTM C 230, BS 4551:1

Specification: The flow table consists of a 30 cm dia polish steel plate with 3 engraved annular circles 7, 11 and 19cm dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm i.d. at base and 40mm i.d. at top, height of the mould 90mm.

 

Request
Callback

Product Details:

Model No.: VT-1005

Standards: ASTM C 266

Specification: A base with a Vertical shaft and Two horizontal arms. The lower arms is adjustable for height. 1 no. Initial needle 1/12-inch dia. ¼ lb. Wt. 1 no. Final needle 1/24 inch dia. ¼ lb. Wt. 1 no. Glass base plate. Complete as above.

Request
Callback

Product Details:

Model No.: VT-1414

Standards:

Specification:

Features :

• Compact and rugged for laboratory and small production units
• Designed for speed crushing
• Discharge opening adjustment range: 3 - 10mm
• Manganese steel jaws adjustable up to 6 mm opening
• 250 kg materials can be crushed in approx eight hours
• Supported with strong steel frame
• Voltage: 440 V, Three Phase A.C. Supply

 

 

Request
Callback

Product Details:

Model No.: VT-1015

Standards: IS 4031-1968, IS 1624-1960 & ASTM C 151, C 141

Specification: The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature.

Note: Ordinary laboratory cement autoclave with mild steel chambers are also available

Request
Callback

Product Details:

Product Description : The vessel of our motorized concrete mixer is fitted with the ½ HP motor with the power capacity of 220V 50Hz AC supply with single phase. Its steel vessel has the capacity to consist 55/110 liters. The vessel pulleys rotate at the speed of 20-22 RPM. This machine consists of the following facilities-

Specification:

• The steel vessel is fixed with a frame for the convenience of its movement along with a pulley.
• The vessel is connected with a motor to rotate with the power supply.
• There are blades inside the vessel to mix the ingredients of the concretes accordingly.
• The blades are quite appropriately sharp for serving the purpose.
• There is a large manual wheel along with a pulley to manage the work in case of power failure.

Request
Callback

Product Details:

Model No.: VT-1011

Standards: IS 4031 1968, ASTM C 188

Specification: Used for finding specific gravity of hydraulic cement. Made from Borosilicate glass. The flask is 243mm in total height, having a bulb of 90mm dia. of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia. in that fits a ground glass stopper. The neck has over-all 11mm i.d. upper portion is graduated from 18ml to 24ml with 1 ml graduation. Just at the bottom of the neck 1 ml capacity is marked in between there is 17 ml capacity bulb.

 

Request
Callback

Product Details:

Model No.: VT-1010

Standards: IS 269, 712, 5514, 1727 , 2645, 6932 ( PART IX) BS 6463

Specification: It consists of a small split cylinder forming a mould. On either side of the split cylinder. Two parallel indicating arms with pointed ends are attached. Supplied complete with two glass plates and a lead weight.

 

Request
Callback

Product Details:

Model No.: VT-1147

Empowered with innovative technologies and advanced production unit, we are a renowned manufacturer and supplier of premium quality Power Floater Machine. The offered machine is used for smoothing the surfaces of marbles by rubbing on it. This machine is manufactured using supreme quality components by our adept professionals at our advanced production unit. In addition to this, clients can avail this Power Floater Machine from us at competitive prices.

Features:

• User friendly
• Noise-free operation
• High performance
• Sturdy design

Specification :

Powered :3 H.P. Electric motor through gear box 
Floating : 130 RPM

Technical Details: 

 

Request
Callback

Product Details:

Model No.: VT-1249

Capacity: 25kgf to 100kgf (1KN) 200kgf (2KN) 250kgf (2.5KN) 1000kgf (10KN) 2000kgf (20KN) 2500kgf (25KN) 3000kgf (30KN) 5000kgf (50KN) 100KN (10Tons) 200KN (20Tons) 500KN (50Tons) 1000KN (100Tons) 2000KN (200Tons), 3000KN (300 Tons)

Specification: The Proving Rings are made of special steel, carefully forged to provide high and stable accuracy, dependability and repeatability. The dial gauge and anvil are mounted on U-brackets clamped to the ring body by set screws.

 

Request
Callback

Product Details:

 

 

 

Request
Callback

Product Details:

Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape two clamps slide over the foot grips of a standard slump cone and hold it securely while filling and rodding. A Combination swivel carrying handle. Complete with graduated temping rod 0-60cms long and 16mm dia with 0-30cms scale graduation. Accessories :- Slump Cone 10cms top dia, 20cms bottom dia and 30cm height.

Request
Callback

Product Details:

Product Specification

Product Description

We are offering a quality range Test Sieves, which are widely appreciated for high consistency, fit and stable functions. These are sourced from reliable vendors of the industry and are offered in customized solutions to meet client's requirements and specifications. Our range of Test Sieves are manufactured for various Household and Industrial usages.

 

Specifications:

 

Request
Callback

Product Details:

Standards: IS 4031, 2645, 2542 ( PART-1), 1727, 5513 & 712. BS 12, 146, 915, 1370, 4027, 4246, 4248, AASHTO T 129, E 131.

Specification: The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger. It comes with a dashpot which facilities gentle lowering of the needles.

Accessories: Mild steel base plate 5 inches x 5 inches. Fulcrum mould , brass , 80 mm i.d. base dia x 70 mm i.d. top dia , 40 mm height.

Note: Normally set of needles and mould which meet is requirements as per I.S. 5513 are supplied. While ordering please specify the specification code of the instrument required. Vicat needle apparatus for determining consistency of hydraulic cement. Gypsum plaster, lime etc. As per ASTM C 187-58 C 472-62 C 110-58, IS 2542(Part-1) can also be supplied.

 

Request
Callback

Product Details:

V-TECH is a renowned organization, which has gained enough positive feedbacks from its customers all around the world. It is the manufacturer and supplier of beam mould, the concrete testing lab equipment of identified standard quality.

The standard module for the beam mould : In V-TECH we are always cautious about the standard module of our products. As we export them to the customers of all over the world, we carefully maintain the international standard of this product BS 1881-108.

Product Description : There are 2 sets available in this product. One is Set -1120 A. Its beam mould is 100mm X 100mm X 500mm and the other is the Set – 1120 B. Its beam mould is 150mm X 150mm X 700mm. The flatness of the faces is +/- 0.2 mm and it is also finished in 0.2 mm.

Specification:

• The material of the apparatus is cast iron/ mild steel.
• There are four plates in the mould and they are assembled together.
• Each mould is completed with its assembly with the base one.
• The face part of the machine is flat in type.

Request
Callback

Product Details:

The International standard of the product : In Se Test India Pvt. Ltd, we are proficient in taking care of the quality standard of the products. Therefore, we maintain both the national and International standard based on the customers. We work on the quality standard IS 1199 and BS EN 12350 respectively for the national and International customers.

Product Description : The vibration table's measurement is 380 mm in length and 260 mm in width. The elastic support's height is 305 mm above the floor. The measurement of the tamping rod of the slump cone is 16 mm in diameter and it is rounded about 600 mm in each end.

Specification:

• The apparatus consists of a table, elastic support, a cord, a plug, and a stop and start switch.
• There is a holder, which is fixed with the base and there is a swivel arm telescoped with the funnel.
• There is also a swivel arm attached with the vibration table.
• There are the lifting handles in both the slump cones.

 

Request
Callback

Product Details:

Specification: The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the Digital Indicator readings.

Optional:

1. Ranges: 50 kN to 3000 kN 
2. Channel and Pillar Type Both Are Available. 
3. Extra gauges can be attached to the machine (max. 1 nos. ) 
3. Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.

 

Request
Callback

Product Details:

Model No.: VT-1016

Standards: IS 11262-1985, ASTM C 186

Specification: This equipment is required to determine the heat of hydration of cement as expressed in calories per gram. The equipment comprises of the following:
A wide mounted double walled vacuum flask with a stop cock 38 mm & a insulating container for the flask
A Beckman thermometer (Range 5° C) held tightly by the cock stopper in such a way as to avoid accidental contact with the stirrer blade & the reading lens. To facilitate the easy removal the cock stopper is in two halves.
A constant speed stirrer (double bladed propeller type)extended to within 38 mm from the bottom of the flask.
A funnel (Gooch type) with a stem of 6 mm inner dia & a body approx 25 mm long and 25 mm dia. is fitted to the cock stopper for introducing the sample.

 

Request
Callback

Product Details:

Model No.: VT-1020

Standards: IS 1727 1967, IS 4031 1968, ASTM C 394, C 64

Specification: The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800 mm from the centre of the table. There is a projecting lug with a plane face on the upper face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gearbox through a V-belt an pulleys. The cam rotates at a rate of 60 Rev/Min. A stroke counter fitted with micro-switch is provided which stops the machine after 60 Jolts. Locating pins are provided for mounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, Single Phase, A.C. Supply. A Digital Preset Counter can be supplied at an extra cost.

Spares and Accessories :
(1) Steel mould with base plate having three compartments each having 40 x 40 x 160 mm, internal dimensions.
(2) Apparatus for de-moulding the specimen.

 

Request
Callback

Product Details:

Model No.: VT-1130

Standards: ASTM C 469

Specification: Consists of a frame with a bottom ring and a top ring with tightening screws to firmly clamp the compressometer over the cylinder. A dial gauge .002 mm x 5 mm is mounted on the upper ring and the tie of the dial gauge rests on an anvil. The zero on the dial gauge can be set by adjusting the anvil screw. Supplied in a wooden carrying case.

 

Request
Callback

As Per IS 2386 (P-IV) Specification :The selection of proper aggregate for a givenapplication is essential to attain the desired quality. Various characteristics are requiredto be determined for the selection of appropriate aggregate from the wide range available.Aggregate crushing value test apparatus is used for measuring resistance of an aggregateto crushing. Made of Mild Steel comprising of: Cylindrical Cell, 150mm internal dia x 130to 140mm height, Plunger, 148mm dia x 100 to 115mm height, Base Plate, 200 to 230mmsquare x 6mm thickness, Tamping Rod, 16mm dia x 450 to 600mm length. Metal Measure,110mm internal dia x 180mm height

Request
Callback

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Model No.: VT-1001

Standards: IS 7535 1986, ASTM C 183, AASHTO T 127

Specification : This is a brass tube approximately 53cm long and 2.8cm I.D. with a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia. is drilled on the tube near handle. Total sample collected at one time is 300 cm approximately.

 

Request
Callback

Heavy duty(Improved Model ) FOR 8 ",12" & 18" TEST SIEVES The Rotap Sieve shaker is durably constructed and is run by ¼ H.P. Electric MOTOR 220 Volts A.C through reduction gear. Designed to carry upto 6/7 TEST SIEVES of 200 mm Dia (8") with one set lid & pan. It reproduces circular and hammering motion is given at top . it reproduce Circular (revolution approx.: 280 to 320 R.P.M and tapping approx.: 140 R.P.M to 160 R.P.M No foundations are required (with timer /without timer)

Request
Callback

Additional Information:

• Minimum Order Quantity: 1 Piece

 

Fitted with a FHP motor.It can accommodate six sieves of 6" to 8" dia.speed can be regulated through a continuosly variable speed regulator fitted to the unit. To work on 220/230 volts A.C.

 

Request
Callback

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

We are offering Glass Tape to our clients.

Request
Callback