Industrial Instruments

Product Details:

It is designed to build a controller to control the bath temperature of a petri dish. The device will be used by student lab of neurobiology to conducting experiments on fruit flies’ thermo channels. An ideal device should have the following feature: easy to use, small development budget (less than $100) and satisfying the performance requirement for conducting experiments. The project is based on an atmega-1284 microcontroller as the main control unit with a PID control algorithm running inside. The petri dish’s bath temperature is heated or cooled by a Peltier Plate. A Thermistor is used as the temperature detection device and sent feedback to the microcontroller regarding to current bath temperature of the petri dish. All components are connected with analog circuits to form a close loop feedback controller in order to dynamically control the petri dish’s bath temperature. Graphic user interface is built with MATLAB to provide easy user access and monitoring.

Product Details:

We are offering Infrared Thermometer to our valued patrons that are highly demanded in various industrial applications. These thermometer are fabricated in strict compliance with international norms and standards at our vendor’s end. Offered thermometer are highly reliable as these are well tested for quality through different quality tests ensuring high quality at customer’s end.

Features:

• Advanced optics to measure smaller targets at greater distance
• Conversion of Celsius/Fahrenheit temperature
• Max/Min/Dif/Avg measurement mode selection
• High/Low temperature alarm setup
• 100 data store/recall function
• Back-light display for use in poorly light areas
• Laser guided sighting system for easy targeting
• Auto power shut off without any operation in 8 seconds
• Data hold function
• Connect to the computer with RS-232 output interface
• Corresponding data analyze software

Product Details:

Product Description

The 8380 AccuBalance® Air Capture Hood is a multipurpose electronic air balancing instrument primarily used for efficiently taking direct air volume readings at diffusers and grilles. It features a detachable micromanometer which can be used with optional probes for increased flexibility in multiple measurement applications.

Applications

+ Test and balance contractors

+ Commissioning agents

+ Facilities managers

+ Health and safety specialists

+ Ventilation system installers

Product Specification

Product Details:

Model No : VT-FTS01

Parameter

Type: Low voltage

Max switching voltage: 100VDC

Max switching current: 0.5A

Min breakdown voltage: 220VDC

Max load current: 1A

Max contact resistance: 100MO

Temperature range: -20~+80°C

Float ball material: PP

Power supply and output method

Maximum power: 10W

 

Product Details:

For High Temperatures Vaisala  Humidity and Temperature Probe HMP5 is designed for high temperature applications such as baking ovens, pasta dryers, ceramics and industrial drying kilns where measurement performance and chemical tolerance are essential. The HMP5 is part of the Indigo product family and compatible with Indigo 200  Series Host Devices and free  Insight PC Software.

FeaturesRH accuracy up to 0.8 %RH,Temperature accuracy up to 0.1 °C (0.18 °F)Temperature measurement range -70 ... +180 °C (-94 ... +356 °F)250 mm (9.84 in) probe allows easy process installation through insulationSensor purge provides superior chemical resistanceModbus RTU over RS-485Plug & play compatible with Indigo™ series of transmittersTraceable calibration certificate: 5 points for humidity, 1 point for temperatureSintered AISI316L filter standard in delivery

Product Details:

Miniature Dew Point Transmitters VTDMT143 & VT-DMT143L (Long) for OEM Applications Miniature size dew point transmitters VTDMT143 and VT-DMT143L are ideal choices when you want to measure dew point accurately in small compressed air dryers, plastic dryers, additive manufacturing and other OEM applications. They are easy to integrate and can be used in Vaisala VTDM70 hand-held. The long version has replaced the VT-DMT242.

 

Features

Nunes Insturments technology with auto-calibration Fast response time

Dew point measurement range -70 ... +60 °C (-94 ... +140 °F)

Accuracy ±2 ºC (±3.6 ºF)

Withstands condensation

Compatible with Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70

Traceable calibration (certificate included) LED alarm for exceeded dew point level

Product Details:

 

Attention

Always a numerous stimuli will be acting upon our senses. Though there are

innumerable stimuli in the environment only certain stimuli will attract us. This act of selective focusing is attention. Span of attention: The maximum number of items that an individual can attend in a single action is called span. This unit of span varies from individual to individual. The meaning of the material will have a greater influence on the span. Obviously, span for nonsense syllables will be lower. Experimentally this is established with the help of a Tachistoscope and cards.

 

Tachistoscope - fall door type :

This is a wooden instrument has a camera slit at the center and falling door behind. By operating a lever provided, a falling door will expose the stimulus (printed material) through this camera slit approximately at the rate of 1/10th of a second. This instrument has been made out of fine quality Teak Wood and elegant finish.

 

Product Details:

Flue gas is the gas exiting to the atmosphere via a flue, which is a pipe or channel for conveying exhaust gases from a fireplace, oven, furnace, boiler or steam generator. Vast-hi Engineers offer the latest and most innovative flue gas analyser to monitor the composition of the flue gas of a boiler heating unit to determine if the mixture of air and fuel is at the proper ratio for maximum heat output. Data logging is an option on all our multi –gas monitors.

Salient Features:

• Portable with IP 65 certified casing
• Graphical display with fault and low battery indications
• 10 hours continuous battery backup
• User – friendly: easy to learn and use
• 4 years guaranteed- life-Oxygen sensor specially designed for combustion purpose. No other gases affect its performance. 8 years life – optional
• Automatic self-calibration: field calibration starts automatically on each start up with aspirated fresh air.
• Strong chromel-alumel thermocouple suitable up to 1000°C with dust and moisture filter &User selectable fuels- gas, oil and coal.
• Automatic self-check for efficiency calculation: specific percentage efficiency of selected fuel is displayed as a check on its calculations with aspirated fresh air.
• Time-tested in-built suction pump.
• Self-test: a) flow fault b) oxygen sensing and c) battery backup time.

Product Details:

Specifications: 
Volume:100 ml
Accuracy:±0.2%
Outer diameter & height:51&62mm
Net Weight:132g

How to use a Density Cup: 
(1)Weigh the Cup when empty 
(2)Fill with the liquid 
(3)Place lid on the Cup 
(4)Weigh the Gravity Cup when full and divide the weight by the volume to determine the Specific Gravity

Product Details:

The HI991001P is a compact, waterproof, portable pH/temperature meter that is supplied complete including a rugged carrying case and a unique titanium body pH electrode that has a built-in temperature sensor. The meter features a large, dual level LCD display for easy viewing of the pH, temperature, and status indicators. The operation of the meter is simplified to two buttons. The HI991001P has an exceptional long battery life of 1200 hours of continuous use.

 

pH Range - 2.00 to 16.00 pH

pH Resolution - 0.01 pH

pH Accuracy - ±0.02 pH

Temperature Range - 5.0 to 80.0°C

Temperature Resolution - 0.1°C / 0.1°F

Environment - 0 to 50°C RH max 100%

Dimensions - 152 x 58 x 30 mm

Weight - 205 g (7.2 oz.)

Product Details:

Ours is a pioneering organization involved in offering a wide range of Digital Watt Meter. It is sourced from the reliable manufacturers who designed it with latest technologies.

Features:

• Professional watt meter with leakage current tester, digital display, battery operated
• LSI – circuit provides high reliability and durability

Product Details:

The VT-V120 is intended for outdoor wet / dry bulb measurements in HVAC cooling tower applications. The VT-V120 is delivered with a weather shield for the transmitter unit to protect it from the outdoor elements. Also, a solar radiation / precipitation shield is provided for the probe to ensure precise and representative outdoor temperature and humidity measurement.

          The VT-V120 has two 4…20 mA loop-powered outputs corresponding to 0...+80°C (+32...+176°F) wet bulb and -40…+60 °C (-40…+140 ° F) temperature.

The package includes:

·         Calibration certificate (ISO9001 compliant, traceable)

·         VT504A solar radiation shield for housing the measurement probe

·         Rain shield with installation accessories for the transmitter unit

·         5 m (16.5 ft) probe cable

·         Cable gland for 2…6 mm cable

·         NPT1/2" and metric PG9 conduit fittings to facilitate wiring

·         User's Guide in English

 

Product Details:

Product Description

We offer our clients with Fluid Mixers. These are widely used for viscous & semi viscous solutions such as paint and enamel mixing, mild agitation, pulp and other food mixing. We also offer these in customized specifications as per the client''s requirements.

 

Features -

 

Available in four different speeds, viz. 375, 290, 200, 125
HP ranging from 0.5 to 7.5

 

Applications-

Pharmaceutical industries.
Chemical industries.
Cosmetic industries.

Product Details:

Product Specification Product DescriptionIn order to cater the diversified demands of our clients, we have been able to provide a unique range of Hand Wheel Hoes.

Description:

• Useful for interculture in row crops like wheat, maize, cotton, groundnut, sarson and vegetables

Features:

• Light weight, Easy to use
• Can be drilled with adjustment provison of seeds in required depth

Product Details:

Hand-Held Dewpoint Meter VT-V70 measures dew point and temperature accurately over a wide measurement range. The probe may be inserted directly into pressurized processes up to 20 bar (290 psi), and it responds rapidly from ambient to process conditions. This DM70 model is especially suitable for checking the operation of desiccant dryers in compressed air systems.

The VT-V70also supports the use of Vaisala's humidity, carbon dioxide and moisture in oil probes, making it a versatile investment applicable to several multi-parameter applications. Two probes can simultaneously be connected to the VT-V70.

The MI70 Link Windows software and the USB connection cable form a practical mean for transferring logged and real time measurement data from the VT-V70 to a PC. Included in the package

·         VT70 hand-held indicator

·         VT-V70 dew point probe: Td/f: -60 to 20°C (-76 to 68°F)

·         Calibration certificate

·         VT-V70 sampling cell with quick connect fitting for convenient process installation

·         Rechargeable battery pack and universal AC adapter

·         USB cable

·         User guide in English

·         Professional carrying case

Product Details:

Product Description

Model AGA1 (Pneumatic) - The AG-A1 Laskin Nozzle Aerosol generator is designed especially for testing of biological safety cabinets and filter systems from 540 to 5400 cfm.

Specifications:

• Probe Extension: 11 foot length
• Stable at Low Concentrations of filter systems from 540 to 5400 cfm.
• Sample Flow Rate: 1 cfm(28.3 slpm)

Product Details:

Product DescriptionDressing Drum is specialized equipment that is usedfor sterilizing and storing different types of instruments, surgical requisites, and dressings.

Product Details:

The co-efficient of friction between film to film, film to metal and film to glass is an important property of any plastic film are of the instrument used for the determination. This property is co-efficient of friction tester-inclined plane type.

The V-Tech Co-efficient Of Friction Tester (Inclined Plane Type) made on a rigid metallic base plate. There is a platform of specified size, which lifts angularly at the constant rate with the help of a synchronous motor. There is a sled of standard weight and size.

The equipment is metallic paint & bright chrome plating finish for corrosion resistant finishing.

TECHNICAL DATA

Speed : 1.5 to 2.0 per second

Size of sled : 4” X 2”

Weight of sled : 450 gm.

Power required : 220V AC, Single phase

RELATED STANDARD

TAPPI T .815

Product Details:

The V-Tech COF tester –horizontal plane have a Sled of specified dimensions with a suitable eye screw fastened in one end for the holding to the load cell by a flexible nylon thread.

There is a moving plane which is polished plastic, of specified dimensions. A smooth, flat piece of glass covers the upper surface of the plane. This provides a smooth support for the specimen. The plane moved with the help of the motor.

The force is indicating on the digital display which indicates the frictional force.

All the parts are either painted or bright chrome platted for the corrosion resistance long life.

TECHNICAL DATA

Sled size: 63.5 × 63.5 × 6 mm

Weight of sled: 200 ± 5 gm

Speed of traverse of plane:

150 ± 30 mm/min

Capacity: 500 gm × 0.1 gm

RELATED STANDARD

ASTM D 1894

Product Details:

VT-111 V-Tech Developed Digital Positive Displacement Flow Meter is a superior choice for flow measurement of very wide range of viscosity fluids with the help of Positive Displacement Technology. With the latest technology this flow meter is a very good choice for fluids with wide rage of viscosities. V-Tech Flow Meters provides great accuracy and repeatability over the full range of measurement.

This flow sensor is considered the best choice for diesel, oil, fuel and wide range of other fluids. Please consult an achievers associate for more help.
Features

• High accuracy

• Flow Rate Indicator and Flow Totalizer

• Resettable Total and Cummulative Totalizer

• Independent of viscosity

• Low pressure drop compared to other positive displacement meters

• Resistant to corrosion by advanced materials and bearings

Technical Details

Model                            VT-11 1-25         VT-11 1-40         VT-11 1-50

Inlet and Outlet              25mm / 1”           40mm / 1.5”        50mm / 2”

Flow range                      20-120lpm           25-250lpm         30-300lpm

Accuracy                        +0.5%                 +0.5%                +0.5%

Repeatability                 <0.03%                <0.03%             <0.03%

Max working pressure  3.4Mpa                  1.8Mpa               1.8Mpa

Max viscosity                1000CPS               1000CPS             1000CPS

 

 

Product Details:

FULLY AUTOMATIC COMPUTERISED COEFFICIENT OF FRICTION TESTER (SlipResistance/Friction Ratio ) as per ASTM D1894 Table top model Co-efficient of friction is the ratio of the frictional resistance to the normal pressure acting on two surfaces in contact This co‐efficient of friction is an inverse measure of the relative ease with which the surface of one material will slide over a similar surface or over the surface of another material. There are two methods (A&B) can be adopted for measurement of co‐efficient of friction of plastic ,rubber, paper, films and other similar materials.

Specification :

· Weight of sled : 200 + 5gm

· Travel speed: variable & selectable from 0-250mmpm

· Max. Travel length : 200 mm

· Digital indicator with precision load cell

· Least count :- 5kg

· Accuracy:-0.1gm

· Max. Load holding facility

A. Automatic calculated test results through software( kinetic &static coefficient of friction result)

B. Digital display of friction force of static & kinetic coefficient of friction

C. Pre-programmable test data

D. Operating power : 220 - 230VAC

E. Dimension :60cm x 40cm x25

Accessories :

a. Standard stainless steel sled ( Included )

b. Computer optional ( Cost Extra )

Product Details:

Product Description

Power 4.5 HP - 3.3 kW
Displacement 61.3 cm³
Max. air flow 20.0 m³/min
Air speed 90 m/sec
Liquid delivery rate 0.67 ÷ 5.15 L/min
Liquid tank capacity 16 L

Product Details:

The VT-V333 is the top-of-the-line versatile instrument for applications where a small remote probe is needed. Humidity and Temperature Transmitter VT-V333 series incorporates Nunes instruments 40 years of experience in industrial humidity measurement.The instrument offers a wide variety of different psychrometric units, including dew point, enthalpy, wet bulb temperature, absolute humidity, and mixing ratio.

The transmitter has a keypad and a large graphical display for convenient monitoring of the reading and transmitter setting changes. For example both output signal type (voltage or current) and scaling can easily be changed by the user.

Analog outputs are preset at the factory to:

·         Channel 1: 4…20 mA = 0...100% RH

·         Channel 2: 4...20 mA = -40...+80°C (-40...+176°F) T

 

Product Details:

 

Hand-Held Carbon Dioxide Meter VT-V70 is a user-friendly meter for demanding spot measurements in HVAC and industrial applications, and as a tool for checking fixed CO2 and RH instruments. In this set you get both a CO2 probe and a RH probe.

The package includes:

· MI70 hand-held indicator

· VT-V70 carbon dioxide probe with GMH70 handle (0...2000 ppm CO2)

· CO2 Calibration certificate (ISO9001 compliant, calibration gases are traceable to VSL Dutch Metrology Institute)

· HMP75 Humidity and temperature probe: 0…100 %RH, -20...+60 °C (-4...+140 °F)

· Traceable Humidity and temperature Calibration Certificate:15, 33, 54, 75 and 95% RH and temperature at ambient

· Rechargeable battery pack and universal AC adapter

· USB cable

· User's Guide in English

· Professional carrying case

 

 

Product Details:

Robust Design, Stability, and Reliability

The aluminium/stainless steel body is NEMA 4X/IP66 -rated and suitable for building sites and industrial settings. VT-V60 series transmitters provide state-of-the-art stability and environmental resistance thanks to sensor.

Traceable Accuracy

. VT-V60 transmitters are always delivered with a traceable calibration certificate.

Field Configurable Outputs

The analog . VT-V60 and . VT-V60 transmitter models use floating 4 … 20 mA loop powered output. The analog outputs are field configurable with easy parameter selection using DIP switches.

 

Product Details:

 

The 2-wire VT-V82 transmitter measures temperature in ventilation ducts. The transmitter combines easy installation and reliable operation with low requirement for maintenance.

The VT-V82 transmitter is optimized for easy installation. It contains no separate small parts that can get lost. All connectors are clearly labeled and the connectors are within easy reach. The transmitter is well suited to variable duct sizes.

Detailed information

Measurement parameter(s) - Temperature

Measurement range - -40 ... +60 °C (-40 ... +140 °F) T

Measurement accuracy - ±0.5 °C T

Operating temperature - -40 ... +60 °C (-40 ... +140 °F) T

Operating voltage - 20 ... 28VDC at 600 Ohm load

10 ... 28VDC at 0 Ohm load

Analog outputs - 4 ... 20 mA

 

Product Details:

 

VT98304P is rugged and reliable pocket-sized testers that offer quick and accurate reading of Conductivity. VT98304P has manual calibration facility and it can measure conductivity upto 19.99 mS/cm

· Graphite electrodes

· ATC

· Simple one point calibration

· Easy to use

· Economical

 

EC Range - 0.00 to 19.99 mS/cm

EC Resolution - 0.01mS

EC Accuracy - ±2% F.S.

EC Calibration - manual, one point

EC/TDS Temperature - automatic, 0 to 50°C (32 to 122°F)

Cell Type - amperometric graphite

 

Product Details:

 

 

          The VT99300P is a rugged, portable EC/TDS and temperature meter housed in a case rated for IP67 conditions. It is supplied with a two-ring conductivity probe to allow for low range EC measurements from 0 to 3999 µS/cm and TDS measurements from 0 to 2000 ppm. All readings are adjusted with Automatic Temperature Compensation (ATC) and users are able to adjust the temperature correction coefficient and TDS factor for accurately compensated measurements.

EC Range             -        0 to 3999 μS/cm

EC Resolution      -        1 μS/cm

EC Accuracy        -        ±2% FS

EC Calibration     -        automatic, one point at 1413 μS/cm

TDS Range           -        0 to 2000 ppm (mg/L)

TDS Resolution   -        1 ppm (mg/L)

TDS Accuracy      -        ±2% F.S.

TDS Calibration   -        automatic, one point at 1382

                             ppm (CONV 0.5) or 1500 ppm (CONV 0.7)

 

Product Details:

Product DescriptionThis machine is a portable model for polishing of metallographic sample. Disc dia 200mm, made of Aluminum.Speed continuously variable up to 950 RPM. Rating – 0.25HP single phase 220 Volt A.C. provided with sink and swing type laboratory water tap. Water proof Formica table top.

Product Details:

Product DescriptionSchredder made in India for destroying large quantities of materials, Good quality at unbelivable prices, just ask, which ever size and capacity required is available ready to ship to Europe,

• Small,
• Medium
• Large
• Industrial
• Papers
• plastics
• wood
• glass
• rubber

Additional Information:

• Item Code: VT0678

Product Details:

Owing to our vast industry experience, we have been able to provide an excellent range of Extrex H GPS Tracker to our clients. It is highly valuable for intelligence purposes and suitably tracks the location of any particular person or object. Furthermore, we are offering this product at affordable price range and ensure on time delivery at the clients’ end.

Features:

• Perfect for outdoor enthusiasts on a budget
• eTrex H comes with a high-sensitivity GPS receiver that locks onto satellite signals quickly and maintains accuracy — even in the toughest conditions
• And just like the popular eTrex, this little yellow wonder combines an intuitive interface and a rugged exterior into a lightweight hand held that fits in the palm of your hand

 

Specifications:

• Enjoy Clear Reception-With its high-sensitivity, WAAS-enabled GPS receiver, eTrex H locates your position quickly and precisely and maintains its GPS location even in heavy cover and deep canyons. The advantage is clear — whether you’re in deep woods or just near tall buildings and trees, you can count on eTrex H to help you find your way when you need it the most
• Built for Adventure -You can operate your eTrex H with just one hand using five buttons, which are located on either side of eTrex H within easy reach of your fingers. Thanks to its bright yellow case, eTrex H is easy to find in your boat or backpack. And, eTrex H is IPX7 waterproof, so it can take an accidental splash or dunk in the water and still continue to perform
• Find It and Go – With eTrex H, your adventure can last and last — up to 17 hours on just 2 AA batteries. While you roam, you can store up to 500 way points in memory for easy retrieval. Just enter the point you want to go to, and eTrex H points you to your destination (no street or terrain maps). To get home, use Garmin’s exclusive Track Back® feature to reverse your track log and help you navigate back to your starting point.eTrex H: Lock onto the great outdoors

Product Details:

Product Description

 

Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.

Features:

• Strong construction

• Excellent performance

• Easy to use

Product Details:

The Laboratory Refractometer VT-DR 194(AB)is designed for the measurement ofrefractive index, average dispersion of liquids, solids and for determination ofpercentage sugar content in agues solutions. In view of high accuracy achievedwith the use of even a few drops of liquid or substance under test the refractmetric measurement present a convenient and economical method of testing.They find their applications wherever the components of mixture show variousindexes of refraction. The refract metric measurements are applied to researchand control works in chemical and food industry.
TECHNICAL SPECIFICATIONS
1. Refractive Index (nD) Range : 1.300 - 1.7002. Refractive Index (nD) Accuracy : 0.00023. Refractive Index (nD) Min. Div. : 0.00054. Brix (%) Range : 0 – 955. Brix (%) Min. Div. : 0.256. Temperature Range : 0 deg. C - 50 deg. C

Product Details:

Model : VT - 406

DISPLAY : 41/2 digit 0.5"ht LCD

RANGES : 0-±199.99mVDC / 0-±19.999mADC / -100.0°C to + 400.0°C

ACCURACY : ± 0.05% ± 2 digit for mV/mA/ ±0.25% ± 2 digit for PT-100 RTD mV/mA/PT - 100 RTD : Selectable by a Push Button

MILLIVOLT / MILLIAMP : Selectable by a Push Button

MEASURE / SOURCE : Selectable by a Push Button EXTERNAL PT-100 RTD/

PT-100RTD SOURCE : Selectable by a Push Button

MEASURE SOURCE : Measurement of mV/mA, External PT-100 RTD IN °C

SOURCE : a) Millivolt / Milliamp output a•ustable b means of 'Coarse' &

*Fine' Potentiometers mA Load 500 ohms

b) For PT-100 RTD

i) In PT-100 RTD Mode/Measure Mode.

the desired temperature in °C is adjustable by means of 'Fine'

(PT-100) Potentiometer.

ii) In PT-100 Mode/Source Mode, the resistance value

corresponding to the -Set Temperature" is available at the

output terminals.

POWER : 9 V DC Battery (2 Cells)

Product DescriptionWith sincere intention to preserve and uplift our reputation in the market, we are offering a distinguished assortment of Ross Flex Tester. Use to find the resistance synthetic elastomers to cut growth, our given range of flex tester is manufactured from the finest quality material and sophisticated technology in accordance with industry set standards. We also provide defect free flex tester at customer’s premises after examine it on numerous parameters.

Features:

• Robust structure
• Easy to operate
• Noiseless functioning

Specifications:

• Dimensions of test specimens : 150 x 25 x 6.3 mm
• Numbers of test specimens that can
• be tested simultaneously : Six pairs
• Angle of bending of specimens : 90°
• Radius of bend : 5 mm
• Frequency of flexing : 100 ± 5 cycles per minutes
• Width of slit : 2.5 mm
• Distance of slit from fixed end : 62 mm
• Motor : ¼ HP single-phase 230 volts AC

Additional Information:

• Minimum Order Quantity: 1 Piece

A sliding caliper featuring a double sided measuring scale from 0 to 230 mm and two measuring arms (with rounded and sharp ends). The slot of the sliding section (containing an arresting bolt) features a highlighted index that provides the measured value. Made from stainless steel with a matte finish, the instrument is designed to determine selected dimensions of the head (e.g. morphological facial height, nasal height and width, the distance between the inner/outer eye corners, lower jaw height, mouth width, physiognomical ear length, etc.), hand width, foot width, etc. The rounded ends serve for measurements carried out on live bodies, while the sharp ends are used for determining the dimensions of skeletal material. The instrument weighs 193 grams.

Additional Information:

• Minimum Order Quantity: 1 Piece

The VT-V338 enables fast and reliable detection of moisture in mineral based transformer oil. It primarily measures the moisture of the oil as water activity (aw), but in this version the reading is converted into a ppm output calibrated for mineral-based transformer oils.
Measurement parameter(s) Moisture (ppm)
Temperature
Measurement range - 0 ... 1 aw
 -40 ... +180 °C (-40 ... +356 °F) T
Measurement accuracy - ±0.02 (0 ... 0.9 aw)
 ±0.03 (0.9 ... 1.0 aw)
Operating temperature - -40 ... +180 °C (-40 ... +356 °F) probe only
High temperature - +180 °C (+356 °F)
Operating pressure - 0 ... 40 bar (0 ... 580 psi)
Operating voltage - 10 ... 35 VDC, 24 VAC ±20%
Analog outputs - 4 ... 20 mA (default setting)
 0 ... 20 mA
 0 ... 1 V

Additional Information:

• Minimum Order Quantity: 1 Piece

Product DescriptionWe are offering for our valued client's quality approved Airborne Sensors. This is designed in accordance with the set industry standards at our end. Offered sensor can be accessed in varied sizes and dimensions for applications in different industries. Our well educated experts use the latest technology and quality proven raw material for manufacturing this product. In order to meet exact needs of our clients, this can be customized in various specifications.

Features

• Excellent strength
• Appropriate performance
• Easy installation

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Detailed Product Description

Three Digit Digital Display    Breath alcohol Tester with mouthpiece  

FUNCTION:

1. Sensor: Semiconductor alcohol sensor

2. Warm-up time: Within 10 seconds

3. Respond time: Within 5 seconds

4. Operating temperature range: 5 ~ 40 oC

5. Detection range: 0.000% - 0.199% BAC / 0.000- 0.995 mg/l

6  Digital display results (% BAC / mg/l)

7. Quick response and resume

8. Auto power-off

9. Red-colored backlight

10. Low voltage indicator

11. Power input: Use 2xAAA 1.5V alkaline batteries (not included)

12. Unit size: 116x 68x 25 mm

Product Description

We hold immense expertise in catering to the variegated requirements of the customers by bringing forth a remarkable Chromatography Apparatus. To suit the requirements of patrons, we manufacture these apparatuses as per their given details. Apart from this, we manufacture these apparatuses by using high grade glass under the supervision of experts.

 

Features :

• Outstanding corrosion resistance
• Smooth pore and surface
• Transparency
• Catalytic, inertness
• No effect on taste and odor
• Physiological inertness

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Technical Specification :

Y Deflection Factor:

Operating mode          Y 1, Y 2, ALT, CHOP, ADD, X-Y

Deflection Factor      5 m V / div~20 V / div in

(Y1 or Y2)                1-2-5 sequence, altogether 12 steps. Error <3%         

MAG Rate              x               5 Error < 5%

Frequency

Bandwidth                            AC: 10 Hz~30 Hz-3 dB DC: 0~30 MHz-3 dB

Frequency B

andwidth by MAG                      AC: 10 Hz-5 MHz-3 dB DC:0~5 MHz-3 dB

Rising time                            <18nS, <70ns by MAG

Overshot                                <5%

Damp                            <5%

Coupling Mode               AC DC

Input Impedance        1±5% M Ω < 30 pF (direct) 10±5% M Ω < 23 pF (by probe)

Max Safe Voltage      400 V (DC ACp-p)

Slope Inverting              Y2 Only

Product Details:

 

 

 

 

Product description:

 

 

To meet the various requirements of the customers, we are involved in offering a wide assortment of Salt Spray Chamber.

Specification:
• Oxalic Acid Test, ASTM A 262, Practice A
• Ferric Sulfate - Sulfuric Acid, ASTM A262 - Practice B
• Nitric Acid, ASTM A262, Practice C, (Huey Test)
• Copper - Copper Sulfate - 16% sulfuric acid, ASTM A262 - Practice E (Straus Test)
• Copper - Copper Sulfate - 50% sulfuric acid, ASTM A262 - Practice F
• Salt Spray (Neutral / Fog), ASTM B117
• Salt Spray Test (CASS)
• Pitting Corrosion Test, ASTM Gr 48
• Crevice Corrosion
• Hydrogen-Induced Cracking (HIC) Test, NACE TMO284
• Sulfide Stress Corrosion Cracking (SSCC), NACE TM 0177
• Chloride Stress Corrosion Test as per ASTM Gr 36 Specification
• Corrosion test as per ASTM Gr 35 specification
• Ammonia Vapour Test
• Corrosion test as per ASTM A 761 Specification.

 

 

Product Description For a continuous ultrasonic measurement of sludge blanket level. ??? Reduced maintenance with innovative wiper design Superior accuracy with automatic frequency adjustment Digitized probe, temperature compensation, and position sensor ensure reliability. • Vsual performance indicator enhances troubleshooting.  

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

INTRODUCTION

The Combustible Gas Leak Detector has a long, slim gooseneck probe to find leaks in tight areas. It''s adjustable alarm, easy one-hand operation and impact resistance storage case add up to value and convenience

FEATURES

Easily operate the Combustible Gas Leak Detector with one hand to detect presence of combustible gases. Audible and visual indicators help pinpoint leak source. Adjustable "tic" rate helps eliminate background gas concentration in contaminated environments.

● Higher Sensitivity

● Adjustable tick rate to locate leaks quickly and easily

● Visual leak detection by LED indicators

● Precision sensor detects even the smallest leaks

● Fast response of less than two seconds to 40% LEL

● Includes earphone Jack

● 16" gooseneck

SPECIFICATIONS

Sensitivity 50 ppm methane

Sensor Type Low power semiconductor

Warm Up Time Approx.60 seconds

Response Time Less than 2sec. (up to 40% LEL)

Duty Cycle Continuous

Probe Length 16"

Power Supply 3"C" cell batteries

Battery Life 8 hours continuous use, typical

Alarm Visible & Audible at 10% LEL

for Methane. Can be calibrated for other

concentrations or gases.

Warranty 1 year

Product Details:

Description :

Security Handheld Metal Detector

Alarm and Vibration

Alarm mode : sound and light alarm and vibration alarm

Detect metal Size : All contraband metal objects

Measuring range: mobile phones, knives, cheating tool, contraband metal

Type : Metal Detector

Scope : station, subway, schools, factories for metal security sites

Dimensions : 410 x 85 x 45 (mm)

Power supply: standard 9v alkaline battery stack

Working environment: -5  to + 55  centigrade

Features :

With holster for easy carrying.

With charging function, charge time 4-6 hours.

High sensitivity, can detect ferrous and non-ferrous metals, simple to use, convenient and easy to adjust. Using cyclic switch to switch sound alarm and hidden vibration alarm, optional headset Alkaline batteries alarm ratio of 10% -15% work more than 40 hours of continuous work. Detection of a minimum size of the object back to the needle.

Video Measuring System (VMM) for fast inspection of small & medium size parts having tight tolerance, critical GD&T and it can also be used for many more applications. It can provide high accuracy for inspection of parts and can drastically reduce the cycle time.

There are two types of Automated Vision System

1. Vertex The Vertex Mufti-sensor Measurement Systems implement new technologies to provide speed and accuracy on reliable and affordable measuring machines. The systems include InSpec Metrology Software, a programmable optical zoom, 3x digital zoom, non-linear stage compensation, non-linear optics compensation, and advanced LED lighting.

 

Excel The Excel Multi-sensor Measuring CentersTM employ new technologies to provide high speed and accuracy on reliable and affordable measurement systems. In addition to Vision capabilities, the Excel offers Touch Probe and Laser measurement capabilities. Touch Probe capabilities improve 3D measurement capabilities. Laser capabilities improve speed for scanning and Z height measurements. With the multisensor capabilities, advanced digital and optical zoom, proprietary edge detection, and InSpec Metrology Software, the Excel Measuring CentersTM can handle demanding measurement applications.

 

Manual Vision System (SOL)

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Specification Of Milk Analyser 

Measuring parameters                               Analytical range in milk

Fat                                                               0,01– 25% (45%*)

Solids-non-fat (SNF)                                      3% – 40%

Density**                                                     1015 – 1160 kg/3

Protein                                                         2% – 7%

Lactose                                                         0,01% –20%

Added water                                                  0% – 70%

Milk sample temperature                                 1°C – 40°C

Freezing point                                                –0,4°C — –0,7°C

Salts                                                              0,4% – 4%

Power supply                : 180-240V/12 V (switching adapter),

                                      with protection of reverse ± and high voltage

 Power consumption       : max 2.2 Amp, average 0,6A

Operating temperature   : 10-43 deg C